Principal
Bibliografía
Noticias
Prontuario
Directorio
Proyectos
Servicios
Socios
Software
Licitaciones
Formación
Empleo
Normativa
Organismos
Vínculos
Mapa
G1-90(1999)e1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens G2M-88(1996)e1 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 633°K or in Steam at 673°K [Metric] G2-88(1996)e1 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F or in Steam at 750°F G3-89(1999) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing G4-95 Standard Guide for Conducting Corrosion Coupon Tests in Field Applications G5-94(1999) Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements G6-88(1998) Standard Test Method for Abrasion Resistance of Pipeline Coatings G7-97 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials G8-96 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings G9-87(1998) Standard Test Method for Water Penetration into Pipeline Coatings G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings G11-88(1996)e1 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings G12-83(1998) Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel G13-89(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test) G14-88(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) G15-99b Standard Terminology Relating to Corrosion and Corrosion Testing G16-95(1999)e1 Standard Guide for Applying Statistics to Analysis of Corrosion Data G17-88(1998) Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) G18-88(1998) Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines G19-88(1996)e1 Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial G20-88(1996)e1 Standard Test Method for Chemical Resistance of Pipeline Coatings G21-96 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi G22-76(1996) Standard Practice for Determining Resistance of Plastics to Bacteria G23-96 Standard Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials G24-97 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass G26-96 Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials G28-97 Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys G29-96 Standard Practice for Determining Algal Resistance of Plastic Films G30-97 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens G31-72(1999) Standard Practice for Laboratory Immersion Corrosion Testing of Metals G32-98 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus G33-99 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens G34-99 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) G35-98 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids G36-94 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution G37-98 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys G38-73(1995)e1 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens G39-99 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens G40-99 Standard Terminology Relating to Wear and Erosion G41-90(1994)e1 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment G42-96 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures G44-99 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution G46-94(1999) Standard Guide for Examination and Evaluation of Pitting Corrosion G47-98 Standard Test Method for Determining Susceptibility to Stress-corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products G48-99a Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution G49-85(1995)e1 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens G50-76(1997)e1 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals G51-95 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing G52-88 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater G53-96 Standard Practice for Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials G54-84(1996) Standard Practice for Simple Static Oxidation Testing G55-88(1998) Standard Test Method for Evaluating Pipeline Coating Patch Materials G56-82(1995)e1 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons G57-95a Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method G58-85(1999) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments G59-97 Standard Practice for Conducting Potentiodynamic Polarization Resistance Measurements G60-95 Standard Test Method for Conducting Cyclic Humidity Tests G61-86(1998) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys G62-87(1998) Standard Test Methods for Holiday Detection in Pipeline Coatings G63-99 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service G64-99 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys G65-94 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus G66-99 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) G67-99 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) G69-97 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys G70-81(1998) Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) G71-81(1998)e1 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes G72-82(1996)e1 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment G73-98 Standard Practice for Liquid Impingement Erosion Testing G74-82(1996)e1 Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact G75-95 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number) G76-95 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets G77-98 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test G78-95 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments G79-83(1996)e1 Standard Practice for Evaluation of Metals Exposed to Carburization Environments G80-88(1998) Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings G81-97a Standard Practice for Jaw Crusher Gouging Abrasion Test G82-98 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance G83-96 Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus G84-89(1999)e1 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing G85-98 Standard Practice for Modified Salt Spray (Fog) Testing G86-98a Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments G87-98 Standard Practice for Conducting Moist SO2 Tests G88-90(1997)e1 Standard Guide for Designing Systems for Oxygen Service G90-98 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight G91-97 Standard Practice for Monitoring Atmospheric SO2 Using the Sulfation Plate Technique G92-86(1997)e1 Standard Practice for Characterization of Atmospheric Test Sites G93-96 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments G94-92(1998) Standard Guide for Evaluating Metals for Oxygen Service G94-92(1998) Standard Guide for Evaluating Metals for Oxygen Service G95-87(1998)e1 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) G96-90(1996)e1 Standard Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) G97-97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications G98-91(1996)e1 Standard Test Method for Galling Resistance of Materials G99-95ae1 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus G100-89(1999) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization G101-97 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels G102-89(1999) Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements G103-97 Standard Test Method for Performing a Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution G105-89(1997)e1 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests G106-89(1999) Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements G107-95 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input G108-94(1999) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels G109-99a Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments G110-92 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution G111-97 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both G112-92 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys G113-94 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials G114-98 Standard Practice for Aging Oxygen-Service Materials Prior to Ignitibility or Flammability Testing G115-98 Standard Guide for Measuring and Reporting Friction Coefficients G116-99 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion G117-98 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests G118-96 Standard Guide for Recommended Data Format of Sliding Wear Test Data Suitable for Databases G119-93(1998) Standard Guide for Determining Synergism Between Wear and Corrosion G120-95 Standard Practice for Determination of Soluble Residual Contamination in Materials and Components by Soxhlet Extraction G121-98 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents G122-96 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents G123-96 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution G124-95 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres G125-95e1 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants G126-94 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres G127-95 Standard Guide for the Selection of Cleaning Agents for Oxygen Systems G128-95 Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems G129-95 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer G131-96 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques G132-96 Standard Test Method for Pin Abrasion Testing G133-95 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear G134-95 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet G135-95 Standard Guide for Computerized Exchange of Corrosion Data for Metals G136-96 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction G137-97 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration G138-96 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance G139-96 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method G140-96 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method G141-96 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials G142-98 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both G143-96 Standard Test Method for Measurement of Web/Roller Friction Characteristics G144-96 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer G145-96 Standard Guide for Studying Fire Incidents in Oxygen Systems G146-96 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service G147-96 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests G148-97 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique G149-97 Standard Practice for Conducting the Washer Test for Atmospheric Galvanic Corrosion G150-99 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels G151-97 Standard Practice for Exposing Nonmetallic Materials in accelerated Test Devices that Use Laboratory Light Sources G152-98 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials G153-98 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials G154-98 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials G155-98 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials G156-97 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test G157-98 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries G158-98 Standard Guide for Three Methods of Assessing Buried Steel Tanks G159-98 Standard Tables for References Solar Spectral Irradiance at Air Mass 1.5: Direct Normal and Hemispherical for a 37° Tilted Surface G160-98 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial G161-99a Standard Giude for Corrosion-Related Failure Analysis G162-99 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils G163-99 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements G164-99e1 Standard Test Method for Determination of Surface Lubrication on Flexible Webs G165-99 Standard Practice for Determining Rail-to-Earth Resistance G166-00 Standard Guide for Statistical Analysis of Service Life Data
