B1-95 Standard Specification for Hard-Drawn Copper Wire
B2-94 Standard Specification for Medium-Hard-Drawn Copper Wire
B3-95 Standard Specification for Soft or Annealed Copper Wire
B5-00 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
B6-98 Standard Specification for Zinc
B8-99 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B9-90(1998)e1 Standard Specification for Bronze Trolley Wire
B16/B16M-00 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B19-95 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks (Blanks)
B21M-96 Standard Specification for Naval Brass Rod, Bar, and Shapes [Metric]
B21-96 Standard Specification for Naval Brass Rod, Bar, and Shapes
B22-95 Standard Specification for Bronze Castings for Bridges and Turntables
B23-94 Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
B26/B26M-99 Standard Specification for Aluminum-Alloy Sand Castings
B29-92(1997) Standard Specification for Refined Lead
B30-00 Standard Specification for Copper Alloys in Ingot Form
B32-96 Standard Specification for Solder Metal
B33-94 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
B36/B36M-95 Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B37-96 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
B39-79(1999) Standard Specification for Nickel
B42-98 Standard Specification for Seamless Copper Pipe, Standard Sizes
B43-98 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B47-95a Standard Specification for Copper Trolley Wire
B48-92 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B49-98e1 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
B61-93 Standard Specification for Steam or Valve Bronze Castings
B62-93 Standard Specification for Composition Bronze or Ounce Metal Castings
B63-90(1995)e1 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
B66-95 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
B67-93a Standard Specification for Car and Tender Journal Bearings, Lined
B68M-99 Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
B68-99 Standard Specification for Seamless Copper Tube, Bright Annealed
B69-98ae1 Standard Specification for Rolled Zinc
B70-90(1995)e1 Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
B75M-99 Standard Specification for Seamless Copper Tube [Metric]
B75-99 Standard Specification for Seamless Copper Tube
B76-90(1995)e1 Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
B77-81(1994)e1 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
B78-90(1995)e1 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
B80-93 Standard Specification for Magnesium-Alloy Sand Castings
B84-90(1995)e1 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
B85-99 Standard Specification for Aluminum-Alloy Die Castings
B86-98 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B88M-99 Standard Specification for Seamless Copper Water Tube [Metric]
B88-99 Standard Specification for Seamless Copper Water Tube
B90/B90M-98 Standard Specification for Magnesium-Alloy Sheet and Plate
B91-97 Standard Specification for Magnesium-Alloy Forgings
B92/B92M-89(1994)e1 Standard Specification for Magnesium Ingot and Stick For Remelting
B93/B93M-98 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
B94-94 Standard Specification for Magnesium-Alloy Die Castings
B96/B96M-99 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
B98/B98M-98 Standard Specification for Copper-Silicon Alloy Rod, Bar, and Shapes
B99/B99M-96 Standard Specification for Copper-Silicon Alloy Wire for General Applications
B100-97 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
B101-96 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
B102-93 Standard Specification for Lead- and Tin-Alloy Die Castings
B103/B103M-98e1 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B105-94 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B106-96 Standard Test Methods for Flexivity of Thermostat Metals
B107/B107M-94 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Shapes, Tubes, and Wire
B108-99 Standard Specification for Aluminum-Alloy Permanent Mold Castings
B111M-98 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock [Metric]
B111-98 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B114-90(1995)e1 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
B115-00 Standard Specification for Electrolytic Copper Cathode
B116-95 Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
B117-97 Standard Practice for Operating Salt Spray (Fog) Apparatus
B121/B121M-95 Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B122/B122M-95 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B124/B124M-00 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B127-98 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
B129-96 Standard Specification for Cartridge Brass Cartridge Case Cups
B130-95 Standard Specification for Commercial Bronze Strip for Bullet Jackets
B131-96 Standard Specification for Copper Alloy Bullet Jacket Cups
B134-96 Standard Specification for Brass Wire
B135M-96 Standard Specification for Seamless Brass Tube [Metric]
B135-96 Standard Specification for Seamless Brass Tube
B136-84(1998) Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
B137-95(2000) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
B138M-96 Standard Specification for Manganese Bronze Rod, Bar and Shapes [Metric]
B138-96 Standard Specification for Manganese Bronze Rod, Bar and Shapes
B139M-95 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes [Metric]
B139-95 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
B140/B140M-97e1 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
B148-97 Standard Specification for Aluminum-Bronze Sand Castings
B150M-95a Standard Specification for Aluminum Bronze, Rod, Bar, and Shapes [Metric]
B150-98e2 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
B151M-94 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar [Metric]
B151-94 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B152M-97a Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar [Metric]
B152-97a Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B153-91(1996)e1 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154-95 Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
B159M-96ae1 Standard Specification for Phosphor Bronze Wire [Metric]
B159-96ae1 Standard Specification for Phosphor Bronze Wire
B160-99 Standard Specification for Nickel Rod and Bar
B161-93 Standard Specification for Nickel Seamless Pipe and Tube
B162-99 Standard Specification for Nickel Plate, Sheet, and Strip
B163-98a Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
B164-98 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165-93 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
B166-99 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
B167-98 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, and N06045)* Seamless Pipe and Tube
B168-98 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
B169M-96 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar [Metric]
B169-95 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B170-99 Standard Specification for Oxygen-Free Electrolytic Copper Refinery Shapes
B171/B171M-99 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
B172-95 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
B173-95 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
B174-95 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
B176-95 Standard Specification for Copper-Alloy Die Castings
B177-93 Standard Guide for Chromium Electroplating on Steel for Engineering Use
B179-96 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B183-79(1997) Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B187M-97 Standard Specification for Copper Bar, Bus Bar, Rod and Shapes [Metric]
B187-00 Standard Specification for Copper Bar, Bus Bar, Rod, and Shapes
B188-96 Standard Specification for Seamless Copper Bus Pipe and Tube
B189-95 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
B193-95 Standard Test Method for Resistivity of Electrical Conductor Materials
B194-96 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B196M-97 Standard Specification for Copper-Beryllium Alloy Rod and Bar [Metric]
B196-95a Standard Specification for Copper-Beryllium Alloy Rod and Bar
B197/B197M-99 Standard Specification for Copper-Beryllium Alloy Wire
B199-99 Standard Specification for Magnesium-Alloy Permanent Mold Castings
B200-85(1999) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
B201-80(2000) Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
B206/B206M-97 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) Wire and Copper-Nickel Alloy Wire
B208-96 Standard Practice for Preparing Tension Test Specimens for Copper-Base Alloys for Sand, Permanent Mold, Centrifugal, and Continuous Castings
B209M-95 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
B209-96 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B210M-95 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
B210-95 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B211M-95a Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
B211-99 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
B212-99 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
B213-97 Standard Test Method for Flow Rate of Metal Powders
B214-99 Standard Test Method for Sieve Analysis of Metal Powders
B215-96 Standard Practices for Sampling Finished Lots of Metal Powders
B216-97 Standard Specification for Tough-Pitch Fire-Refined Copper Refinery Shapes
B221M-96 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
B221-96 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B223-97 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
B224-98 Standard Classification of Coppers
B226-95 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
B227-98 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
B228-98 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
B229-95 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
B230/B230M-99 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
B231/B231M-99 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B232/B232M-99 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B233-97 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
B234M-95 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
B234-95 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
B236M-95 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
B236-95 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
B237-96 Standard Specification for Refined Antimony
B240-98 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B241/B241M-99 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B242-99 Standard Practice for Preparation of High-Carbon Steel For Electroplating
B243-99e1 Standard Terminology of Powder Metallurgy
B244-97 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
B246-94 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
B247M-95a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
B247-95a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B248M-96 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip and Rolled Bar [Metric]
B248-98 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B249M-94a Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings [Metric]
B249-94a Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B250M-95 Standard Specification for General Requirements for Wrought Copper Alloy Wire [Metric]
B250-95 Standard Specification for General Requirements for Wrought Copper Alloy Wire
B251M-97 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
B251-97 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B252-92(1998) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
B253-87(1999)e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating
B254-92(1998) Standard Practice for Preparation of and Electroplating on Stainless Steel
B255-83a(1995)e1 Standard Specification for Sintered Bronze Structural Parts
B258-96 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
B263-99 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
B265-99 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B267-90(1995)e1 Standard Specification for Wire for Use In Wire-Wound Resistors
B271-96 Standard Specification for Copper-Base Alloy Centrifugal Castings
B272-96 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
B275-96 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
B276-91(1996)e1 Standard Test Method for Apparent Porosity in Cemented Carbides
B277-95 Standard Test Method for Hardness of Electrical Contact Materials
B279-98 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
B280-99 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B281-88(1995) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
B282-83a(1995)e1 Standard Specification for Sintered Brass Structural Parts
B283-99a Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B286-95 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B294-92(1997) Standard Test Method for Hardness Testing of Cemented Carbides
B296-96 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
B298-99 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
B299-99 Standard Specification for Titanium Sponge
B301/B301M-99 Standard Specification for Free-Cutting Copper Rod and Bar
B302-98 Standard Specification for Threadless Copper Pipe, Standard Sizes
B306-99 Standard Specification for Copper Drainage Tube (DWV)
B308/B308M-96 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B311-93(1997) Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
B313/B313M-95 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
B315-99 Standard Specification for Seamless Copper Alloy Pipe and Tube
B316/B316M-96 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B317-96 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles for Electrical Purposes (Bus Conductor)
B319-91(1997) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
B320-60(1997) Standard Practice for Preparation of Iron Castings for Electroplating
B322-99 Standard Practice for Cleaning Metals Prior to Electroplating
B324-93 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
B327-98 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B328-96 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
B329-98 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
B330-98e1 Standard Test Method for Average Particle Size Fisher Number of Metal Powders of Refractory Metals and Their Related Compounds by the Fisher Sub-Sieve Sizer
B331-95 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
B333-98 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B335-98 Standard Specification for Nickel-Molybdenum Alloy Rod
B338-99 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
B339-95 Standard Specification for Pig Tin
B341/B341M-98 Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
B343-92a(1998) Standard Practice for Preparation of Nickel for Electroplating with Nickel
B344-92 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
B345-96 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
B348-99 Standard Specification for Titanium and Titanium Alloy Bars and Billets
B349/B349M-98 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
B350/B350M-96 Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
B351-97 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
B352-97 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
B353-95 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
B354-98 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
B355-95 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
B359M-95 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins [Metric]
B359-98 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B360-95 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
B361-95 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B362-91(1997)e1 Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
B363-99a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
B364-96 Standard Specification for Tantalum and Tantalum Alloy Ingots
B365-98 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
B366-99 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
B367-93(1998) Standard Specification for Titanium and Titanium Alloy Castings
B368-97 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
B369-96 Standard Specification for Copper-Nickel Alloy Castings
B370-98 Standard Specification for Copper Sheet and Strip for Building Construction
B371-96 Standard Specification for Copper-Zinc-Silicon Alloy Rod
B372-97 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
B373-95 Standard Specification for Aluminum Foil for Capacitors
B374-96 Standard Terminology Relating to Electroplating
B379-99 Standard Specification for Phosphorized Coppers-Refinery Shapes
B380-97 Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
B381-99a Standard Specification for Titanium and Titanium Alloy Forgings
B386-91(1997) Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
B387-90(1995)e1 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
B388-96 Standard Specification for Thermostat Metal Sheet and Strip
B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
B390-92(1996)e1 Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
B391-99 Standard Specification for Niobium and Niobium Alloy Ingots
B392-99 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
B393-99 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B394-99 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
B395M-95 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes [Metric]
B395-95 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
B396-87(1994) Standard Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes
B397-85(1999) Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors
B398/B398M-99 Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
B399/B399M-99 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B400-94 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B401-99 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
B403-96 Standard Specification for Magnesium-Alloy Investment Castings
B404-95 Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
B406-96 Standard Test Method for Transverse Rupture Strength of Cemented Carbides
B407-96 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B408-96 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B409-96a Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
B411-96 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
B412-95 Standard Specification for Copper-Nickel-Silicon Alloy Wire
B413-97a Standard Specification for Refined Silver
B415-98 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
B416-98 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B417-89(1995)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders
B418-95a Standard Specification for Cast and Wrought Galvanic Zinc Anodes
B422-99 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
B423-99 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
B424-98a Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
B425-99 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
B427-93a Standard Specification for Gear Bronze Alloy Castings
B428-93(1998)e1 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
B429-95 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B430-97 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
B432-91(1998) Standard Specification for Copper and Copper Alloy Clad Steel Plate
B434-95a Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003)* Plate, Sheet, and Strip
B435-98a Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
B438/B438M-95ae1 Standard Specification for Sintered Bronze Bearings (Oil-Impregnated)
B439-95(2000) Standard Specification for Iron-Base Sintered Bearings (Oil-Impregnated)
B440-99 Standard Specification for Cadmium
B441-96 Standard Specification for Copper-Cobalt-Beryllium (UNS No. C17500) and Copper-Nickel-Beryllium (UNS No. C17510) Rod and Bar
B443-99 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625)* Plate, Sheet, and Strip
B444-94 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625)* Pipe and Tube
B446-98 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625)* Rod and Bar
B447-97e1 Standard Specification for Welded Copper Tube
B449-93(1998) Standard Specification for Chromates on Aluminum
B452-93(1998)e1 Standard Specification for Copper-Clad Steel Wire for Electronic Application
B453M-96 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod [Metric]
B453-96 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod
B455-96 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
B456-95 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
B457-67(1998) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
B458-83a(1995)e1 Standard Specification for Sintered Nickel Silver Structural Parts
B462-97 Standard Specification for Forged or Rolled UNS N08020, UNS N08024, UNS N08026, UNS N08367, and UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
B463-99 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
B464-99 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
B465-93 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B466/B466M-98 Standard Specification for Seamless Copper-Nickel Pipe and Tube
B467-88(1997) Standard Specification for Welded Copper-Nickel Pipe
B468-99 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
B470-95 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
B472-96 Standard Specification for UNS N08020, UNS N08026, UNS N08024, UNS N08926, UNS N08367, and UNS R20033 Nickel Alloy Billets and Bars for Reforging
B473-96 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B474-99 Standard Specification for Electric Fusion Welded UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Pipe
B475-96 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
B476-90(1995)e1 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
B477-97 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
B479-97 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
B480-88(1995) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
B481-68(1997) Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
B482-85(1998) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
B483-95 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
B487-85(1997) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
B488-95 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
B489-85(1998) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
B490-92(1998) Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
B491/B491M-95 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
B493-83(1998) Standard Specification for Zirconium and Zirconium Alloy Forgings
B494/B494M-98 Standard Specification for Primary Zirconium
B495-90 Standard Specification for Zirconium and Zirconium Alloy Ingots
B496-99 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
B497-95 Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
B498/B498M-98 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
B499-96 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method Nonmagnetic Coatings on Magnetic Basis Metals
B500/B500M-98 Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
B501-99 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B502-98 Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
B504-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
B505-96 Standard Specification for Copper-Base Alloy Continuous Castings
B507-86(1998) Standard Practice for Design of Articles To Be Electroplated on Racks
B508-97 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
B511-98a Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
B512-99 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
B514-95 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
B515-95 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
B516-98 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
B517-98 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
B520-93(1998)e1 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
B521-98 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
B522-90(1995)e1 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
B523/B523M-97 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
B524/B524M-99 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
B527-93(1997) Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
B528-99 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
B530-96 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
B531-90(1998)e1 Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes
B532-85(1997) Standard Specification for Appearance of Electroplated Plastic Surfaces
B533-85(1998) Standard Test Method for Peel Strength of Metal Electroplated Plastics
B534-96 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B535-99 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
B536-95 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
B537-70(1997) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
B539-96 Standard Test Methods for Measuring Contact Resistance of Electrical Connections (Static Contacts)
B540-97 Standard Specification for Palladium Electrical Contact Alloy
B541-95 Standard Specification for Gold Electrical Contact Alloy
B542-99 Standard Terminology Relating to Electrical Contacts and Their Use
B543-96 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
B545-97 Standard Specification for Electrodeposited Coatings of Tin
B546-98 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332),Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
B547/B547M-95 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
B548-90 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B549-93 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
B550/B550M-97 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
B551/B551M-97 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B552-98e1 Standard Specification for Seamless and Welded Copper--Nickel Tubes For Water Desalting Plants
B555-86(1997) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test
B556-90(1997) Standard Guide for Measurement of Thin Chromium Coatings by the Spot Test
B557M-94 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
B557-94 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B558-79(1997) Standard Practice for Preparation of Nickel Alloys for Electroplating
B559-93(1998)e1 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
B560-94 Standard Specification for Modern Pewter Alloys
B561-94(1999)e1 Standard Specification for Refined Platinum
B562-95(1999) Standard Specification for Refined Gold
B563-95 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
B564-99a Standard Specification for Nickel Alloy Forgings
B565-94 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
B566-93(1998)e1 Standard Specification for Copper-Clad Aluminum Wire
B567-98 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B568-98 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B569-98 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
B570-96 Standard Specification for Copper-Beryllium Alloy (UNS No. C17000 and C17200) Forgings and Extrusions
B571-97 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B572-98a Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
B573-95a Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003)* Rod
B574-99a Specification for Low-Carbon Nickel-Molybdenum-Chromium,Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
B575-99a Spec for Low-Carbon Nickel-Molydbdenum-Chromium,Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,Low-Carbon Nickel-Chromium-Molybdenum-Tantalum,Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate,Sheet and Strip
B576-94(1999) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
B577-93(1998) Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
B578-87(1999) Standard Test Method for Microhardness of Electroplated Coatings
B579-73(1999) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
B580-79(2000) Standard Specification for Anodic Oxide Coatings on Aluminum
B581-97 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B582-97 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
B584-98a Standard Specification for Copper Alloy Sand Castings for General Applications
B587-97e1 Standard Specification for Welded Brass Tube
B588-88(1994) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
B589-94(1999)e1 Standard Specification for Refined Palladium
B591-98a Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
B592-98 Standard Specification for Copper-Zinc-Aluminum-Cobalt Plate, Sheet, Strip, and Rolled Bar
B593-96 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
B594-97 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
B595-95(2000)e1 Standard Specification for Sintered Aluminum Structural Parts
B596-89(1999) Standard Specification for Gold-Copper Alloy Electrical Contact Material
B597-92(1998) Standard Practice for Heat Treatment of Aluminum Alloys
B598-98 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
B599-92(1997) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
B600-91(1997)e1 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
B601-99a Standard Practice for Temper Designations for Copper and Copper Alloys-Wrought and Cast
B602-88(1999) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
B603-90(1995)e1 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
B604-91(1997) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
B605-95a(1999) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
B606-98 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
B607-91(1998) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
B608-95 Standard Specification for Welded Copper-Alloy Pipe
B609/B609M-99 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
B610-93 Standard Test Method for Measuring Dimensional Change of Metal Powder Specimens Due to Sintering
B611-85(1996)e1 Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
B612-96 Standard Specification for Iron Bronze Sintered Bearings (Oil-Impregnated)
B613-76(1995)e1 Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
B614-95 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
B615-79(1995)e1 Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
B616-96 Standard Specification for Refined Rhodium
B617-98 Standard Specification for Coin Silver Electrical Contact Alloy
B618-99 Standard Specification for Aluminum-Alloy Investment Castings
B619-99a Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
B620-98a Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
B621-95a Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
B622-99a Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B624-99 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
B625-99 Standard Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, and UNS R20033 Plate, Sheet, and Strip
B626-99a Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
B628-98 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
B629-77(1997) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
B630-88(1995) Standard Practice for Preparation of Chromium for Electroplating with Chromium
B631-93(1998) Standard Specification for Silver-Tungsten Electrical Contact Materials
B632/B632M-95 Standard Specification for Aluminum-Alloy Rolled Tread Plate
B633-98 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B634-88(1999) Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
B635-91(1997) Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
B636-84(1992)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
B637-98 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
B639-97 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNSR30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
B640-93 Standard Specification for Welded Copper and Copper Alloy Tube for Air Conditioning and Refrigeration Service
B643-94 Standard Specification for Copper-Beryllium Alloy Seamless Tube
B644-95 Standard Specification for Copper Alloy Addition Agents
B645-98 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
B646-97 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
B647-84 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
B648-78(1984)e1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B649-95 Standard Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire
B650-95 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
B651-83(1995) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
B652/B652M-96(1999) Standard Specification for Niobium-Hafnium Alloy Ingots
B653/B653M-97 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
B654-92(1999) Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
B655/B655M-96(1999) Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
B656-91 Standard Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for Engineering Use
B657-92(1996)e1 Standard Test Method for Metallographic Determination of Microstructure in Cemented Tungsten Carbides
B658/B658M-97 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
B659-90(1997) Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
B660-96 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B661-99 Standard Practice for Heat Treatment of Magnesium Alloys
B662-94 Standard Specification for Silver-Molybdenum Electrical Contact Material
B663-94 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
B664-90(1995)e1 Standard Specification for 80% Silver-20% Graphite Sliding Contact Material
B665-92(1997) Standard Practice for Metallographic Sample Preparation of Cemented Tungsten Carbides
B666/B666M-96e1 Standard Practice for Identification Marking of Aluminum and Magnesium Products
B667-97 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
B668-99 Standard Specification for UNS N08028 Seamless Tubes
B670-95 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
B671-81(1999)e1 Standard Specification for Refined Iridium
B672-95 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
B673-96 Standard Specification for UNS N08904, UNS N08925, and UNS N08926 Welded Pipe
B674-96 Standard Specification for UNS N08904, UNS N08925, and UNS N08926 Welded Tube
B675-96e1 Standard Specification for UNS N08367 Welded Pipe
B676-97 Standard Specification for UNS N08367 Welded Tube
B677-99 Standard Specification for UNS N08904, UNS N08925, and UNS N08926 Seamless Pipe and Tube
B678-86(1993) Standard Test Method for TestMethodfor Solderability of Metallic-Coated Products
B679-98 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
B680-80(2000) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B681-88(1994) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope
B682-81a(1996)e1 Standard Specification for Standard Metric Sizes of Electrical Conductors
|
